Fully Automatic High Speed Disposable 3 Ply Earloop Ear Belt Nonwoven Foldable Medical Surgical Face Mask Manufacturing Production Making Machine

• Application: Nonwoven Microphone Cover
• Automatic Grade: Automatic
• Certification: CE
• Customized: Non-Customized
• Condition: New
• Power: AC 220V,6kw
• Air Pressure: 0.4-0.6MPa
• Material: Non-Woven Fabric
• Transport Package: Wooden Case
• Specification: 6500(L)x2800(M)x1800(H)MM
• Origin: Shanghai

Product Description

Fully Automatic High Speed Disposable 3 Ply Earloop Ear Belt Nonwoven Foldable Medical Surgical Face Mask Manufacturing Production Making Machine

 

Brief Introduction of Mask Machine:

The production line of this equipment is mainly composed of a body machine, a flap conveying line and two earband welding machines. After the body machine outputs the mask body, the mask body sheet is transported to the turning mechanism by the conveyor belt structure. Flip the mask disk onto the conveyor belt connected to the ear belt machine through the turning mechanism, and then transport the mask sheet to the front of the ear belt machine through the conveyor belt * above the mask disk, * place the mask sheet on the ear belt machine by pressing down the cylinder In the mask tray, the ear strap machine subsequently completes the welding of the ear straps of the mask to complete the production of a flat outer ear strap mask product. The automatic line layout is as shown in the figure below. The whole line is one drag two structure.
 
Machine Drawings:


 

Features:
1.Good welding effect and low failure rate;

2.The production speed is efficient, up to about 80-100 pieces per minute, and can be continuously produced for 24 hours;

3.Computer PLC programming control, servo drive, high degree of automation;

4.Photoelectric detection of raw materials to avoid mistakes and reduce waste;

5.Friendly man-machine interface, equipment abnormality and shortage alarm, screen guidance to quickly handle abnormalities.

Working process:

After unwinding the whole roll of fabric, it is compounded by a roller. The fabric is folded by mechanical folding and the nose bridge is pulled by the whole roll. After the fixed length is cut,
Introduced into the edging fabric, the two sides are ultrasonically welded to the seal, and then passed the ultrasonic lateral seal, cut and formed by the cutter;
Drag the two distributors to shunt the mask body to two earband spot welding machines, ultrasonically weld the earbands; set the number for stacking and collecting.
Parameters:

Machine Size	6500(L)x2800(M)x1800(H)MM
Voltage	200V-50/60HZ
Capacity	80-100PCS/min
Weight	1600KG
Worktable Size	3300(L)x2700(M)x1160(H)MM
Power	8.5KW
Automatic Grade	Automatic
Frequency	50/60Hz
Usage	Non woven face mask making

Equipment List

Mask body production machine; 2. Mask line turning machine; 3. Mask ear strap welding machine

Technical specifications: 1, working power 220V, AC ± 5%, 50HZ;

The power of the whole line is about 8.8KW;

Compressed air 0.5 ~ 0.8MPa, after primary drying, filtering Use flow: about 400L / Min

Use environment

Working temperature: 0 ~ 40 ºC Humidity: 5 ~ 38% HR No flammable gas, corrosive gas No dust in the workshop (not less than 100,000)

The power of the whole line is about 8.8KW;

Production efficiency 90 ~ 110 pieces / minute (one-for-two layout)

The overall size of the equipment is about 6800mm * 4800mm * 1990mm

Pneumatic components: SMC or AIRTAC, etc .;

Servo system: Hechuan or Xinjie, etc .;

Mitsubishi or Xinjie, etc .;

Human-machine interface: PLC programmable controller WeinView or Xinjie, etc .;

Sensors: Omron, Panasonic, etc .;

Inverter; Xinjie, rich networking, etc .;

Ultrasonic components: 20KHZ (or 15KHZ);

Molding mold: the standard factory-set reference industry standard for disposable outer ear masks;

PHOTOS FOR PRODUCT:





Our factory:




Ce certificate about mask making machine








FAQ:

Question 1: What are your advantages compared with your competitors?

Answer:

With rich industry experience and strict Product Quality Control systems, we provide:

1). Stable and reliable product at reasonable price

2). Good customer service: Fast response to any inquiry or question

3). On-time delivery.

 

Question 2: Are you manufacturer? 

Answer: Yes, we are manufacturer with more than 10 years' experience.

 

Question 3:  What are your Price Terms?

Answer: Price can be based on FOB, CFR, or CIF, etc.

 

Question 4: What are your Payment Terms?

Answer: Payment shall be made by T/T, L/C, or D/P, etc., it varies considerably according to the region that you are in.

 

Question 5: What's your Minimum Order Quantity?

Answer: Any order quantity is warmly welcomed.